INSTALL GUIDES: Ceilings Insulation

Ceiling Insulation is one of the most cost effective ways of controlling the outside elements. All of the reflective ceiling insulations listed above will reduce the amount of radiant heat that enters the home in summer by up to 97% while providing winter thermal protection. Using this insulation type will reduce the amount of energy required to heat and cool your home. This can also allow you to run your heating and cooling systems less making them last longer. It will can also potentially reduce the HVAC equipment size required thereby saving more money. Proper ceiling insulation is vital for maintaining energy efficiency, enhancing comfort, and reducing utility costs.

Use: SmartSHIELD 10MM, SmartSHIELD 5MM, SmartSHIELD 1/4 Inch, SmartSHIELD 20MM or the Single Bubble Reflective Insulation, Double Bubble Reflective Insulation

Equipment checklist: Reflective tape, double sided tape, utility knife and staples or screws - Refer to application.

How To Insulate A Ceiling

Ceiling SmartSHIELD (New Install) Over Stud:

1. Staple or screw to affix insulation to before installing your studs.
2. To improve performance, let insulation sag to create air-gap (2+ inches).
3. Tape seams with reflective tape.
   
   

Two Layers Over/Under Stud:

1. Staple or screw to affix insulation before installing your studs.
2. To improve performance, let insulation sag to create air-gap (2+ inches).
3. Tape seams with reflective tape.
4. Screw 2nd layer of insulation to underside of stud.

Ceiling SmartSHIELD Two Layers - One Layer Between and One Layer Under Studs:

1. Depending on your stud spacing, staple or screw one layer of SmartSHIELD insulation between studs.
2. Staple or screw larger roll (SmartSHIELD 10MM or SmartSHIELD 20MM) under stud.

Ceiling SmartSHIELD One Layer Under Stud plus Drywall:

1. Staple or screw or insulation to underside of studs.
2. Push insulation into cavity to create 2 inch or more air-gap.
3. Attach drywall.

Ceiling SmartSHIELD Two Layers Between/Under Stud with Furring and Drywall:

1. Depending on your stud spacing, staple or screw one layer of SmartSHIELD insulation between studs.
2. Staple or screw larger roll (SmartSHIELD 10MM or SmartSHIELD 20MM) under stud.
3. Attach 1 inch lathe board (furring strip) through underside of insulation.
4. Attach drywall.

Ceiling SmartSHIELD One Layers Between Studs:

1. Depending on your stud spacing, staple or screw one layer of SmartSHIELD insulation between studs.

Benefits of Ceiling Insulation

1. Energy Efficiency: Reduces heat loss in winter and heat gain in summer, leading to lower energy bills.
2. Comfort: Maintains a consistent indoor temperature, enhancing overall comfort.
3. Soundproofing: Reduces noise transmission between floors.
4. Moisture Control: Prevents condensation and related issues like mold and mildew.

Proper ceiling insulation is crucial for maintaining energy efficiency, reducing heating and cooling costs, and ensuring a comfortable living environment. By choosing the right insulation material and following correct installation and maintenance practices, you can enhance your home's overall energy performance and comfort. Regular inspections and timely repairs will help keep your ceiling insulation in optimal condition for years to come.